Handcrafted Unlacquered Brass Wall-Mount Pot Filler Faucet

A centerpiece of architectural authority for luxury culinary ranges and custom hearths, this solid unlacquered brass wall-mounted pot filler faucet eliminates the strain of carrying heavy water-filled pots across the kitchen. Hand-forged in Marrakech from heavy-gauge virgin 65/35 architectural brass without synthetic lacquers, electroplating, or chemical clear coats, this living brass stove faucet effortlessly withstands intense 60,000+ BTU gas burner heat, oil splatters, and boiling steam without bubbling, peeling, or thermal delamination. The dual-pivot articulating swing arms extend a full 24 inches to service front and rear burners across 30-inch, 36-inch, and 48-inch commercial ranges, then fold flat against tile backsplashes with under 2.5 inches of clearance when not in use. Engineered with dual independent shut-off valves—a primary structural valve at the wall mounting escutcheon and a secondary 1/4-turn valve at the spout nozzle—this pot filler provides fail-safe double leak protection directly over expensive cooktop surfaces. Delivering an unrestricted 4.0 GPM flow rate, it fills large 12-quart canning stockpots and Dutch ovens in under 70 seconds. Precision machined with standard American 1/2-inch NPT (National Pipe Taper) brass threads, it connects directly into standard in-wall drop-ear plumbing elbows at the recommended 12-to-14-inch rough-in height above range grates.